Chưa có sản phẩm trong giỏ hàng.
Attacking the green with high COR and high ball flight like nothing before.
Non-conforming face using high strength maraging steel face
Hollow structure and very forgiving head
Low・deep center + Large FP design, provides high ball flight never seen before.
Hit irons with High COR + high ball flight.
AS、SW adopts a 凹 style scoreline
Iron does not conform to the SLE Rules in order to produce high COR
Hollow Body and wide sole structure to increase forgiveness
「Low and Deep Center」+「Large FP Structure」
Strong lofted irons、with low and deep center helps high launch and high ball flight than ever before.
AS、SW adopts a 凹 style scoreline (non-conforming)
Pursues not only long distance but also spin performance.
Bends at the end of the grip for acceleration and has a firm tip to lessen mis hits
Designed so that it bends softly during the downswing
Shaft specs | #5 | #6 | #7 | #8 | #9 | P | A | As | S | |
|---|---|---|---|---|---|---|---|---|---|---|
Loft angle/bounce angle(°) | 21 | 23 | 25 | 28 | 32 | 37/3.5 | 43/3.5 | 49/9.5 | 56/11.5 | |
Lie angle(°) | 61 | 61.5 | 62 | 62.5 | 63 | 63.5 | 63.5 | 64 | 64 | |
Face progression(mm) | 8.5 | 8.5 | 8.0 | 8.0 | 7.5 | 7.0 | 6.5 | 6.5 | 6.5 | |
Length(inch) | M-43 (S) | 39.25 | 38.75 | 38.25 | 37.75 | 37.25 | 36.75 | 36 | 35.5 | 35.5 |
M-40 (SR) | 39.25 | 38.75 | 38.25 | 37.75 | 37.25 | 36.75 | 36 | 35.5 | 35.5 | |
M-37 (R) | 39.25 | 38.75 | 38.25 | 37.75 | 37.25 | 36.75 | 36 | 35.5 | 35.5 | |
M-35 (R2) | - | 38.5 | 38 | 37.5 | 37 | 36.5 | 35.75 | 35.25 | 35.25 | |
Total weight(g) | M-43 (S) | 336 | 342 | 347 | 355 | 362 | 372 | 387 | 399 | 398 |
M-40 (SR) | 332 | 338 | 343 | 351 | 358 | 368 | 384 | 395 | 395 | |
M-37 (R) | 332 | 338 | 343 | 351 | 358 | 366 | 384 | 395 | 395 | |
M-35 (R2) | - | 337 | 343 | 350 | 357 | 366 | 382 | 395 | 394 | |
Balance | M-43 (S) | C-9.5 | D-0.5 | |||||||
M-40 (SR) | C-9.5 | D-0.5 | ||||||||
M-37 (R) | C-9.5 | D-0.5 | ||||||||
M-35 (R2) | - | C-8 | C-9 | |||||||
Shaft weight(g) | M-43 (S) | 50 | 48 | 49 | 51 | 52 | 56 | 59 | 63 | 63 |
M-40 (SR) | 45 | 45 | 46 | 47 | 49 | 52 | 56 | 60 | 60 | |
M-37 (R) | 44 | 45 | 45 | 46 | 48 | 50 | 55 | 60 | 60 | |
M-35 (R2) | - | 44 | 45 | 46 | 48 | 50 | 53 | 59 | 59 | |
Shaft torque(°) | M-43 (S) | 4.1 | 4.0 | 3.9 | 3.8 | 3.8 | 3.2 | 3.1 | 2.8 | 2.8 |
M-40 (SR) | 4.7 | 4.6 | 4.6 | 4.1 | 4.1 | 3.6 | 3.1 | 2.8 | 2.8 | |
M-37 (R) | 4.8 | 4.3 | 4.3 | 4.1 | 4.2 | 3.6 | 3.0 | 2.8 | 2.8 | |
M-35 (R2) | - | 4.2 | 4.1 | 4.0 | 3.8 | 3.5 | 3.4 | 2.8 | 2.8 | |
Shaft KP | M | |||||||||
Grip | Weight: 42.5, Diameter: M60, Code: None, Back line: Yes | |||||||||
Materials | #5-A / Maraging steel (MAS1C) | |||||||||
Manufacturing | #5-A / Face: Rolled metal | |||||||||
<Made in JAPAN><Made in CHINA>
*SUPER egg IRON does not conform to R&A and USGA SLE rules. See here for details.
*With original head cover (Made in China)
*Club length: determined by PRGR measurement.
